Natural Gas - Corrosion Control
Operators must establish procedures to implement and maintain a corrosion control program for their piping system. These procedures should include design, installation, operation, and maintenance activities on a cathodic protection system. A person qualified in pipeline corrosion control methods must carry out these procedures.
Task#
0001 Measure Structure-to-Electrolyte Potential
0011 Conduct Close Interval Survey
0021 Measure Soil Resistivity
0031 Inspect and Monitor Galvanic Ground Beds/Anodes
0041 Installation and Maintenance of Mechanical Electrical Connection
0051 Installation of Exothermic Electrical Connections
0061 Inspect or Test Cathodic Protection Bonds
0071 Inspect or Test Cathodic Protection Electrical Isolation Devices
0081 Install Cathodic Protection Electrical Isolation Devices
0091 Troubleshoot In-Service Cathodic Protection Systems
0101 Inspect Rectifier and Obtain Readings
0111 Maintain Rectifier
0121 Collect Sample for Internal Corrosion Monitoring
0131 Insert and Remove Coupons/Probes for Internal Corrosion Monitoring
0141 Visual Inspection for Atmospheric Corrosion
0151 Visual Inspection of Buried Pipe and Components When Exposed
0161 Visual Inspection for Internal Corrosion
0171 Measure External Corrosion
0181 Measure Internal Corrosion
0191 Measure Atmospheric Corrosion
0201 Visual Inspection of Installed Pipe and Components for Mechanical Damage
0211 Measure and Characterize Mechanical Damage on Installed Pipe and Components
Georgia Utility Training Academy
GAS REGISTRATION
Please fill out the from below to register. Classes will begin at 8:30 A.M
Connect
Contact Information
Jimmy Davis
Office Phone
678-635-8980
Email
guta@monroega.gov
Address
2200 GA Hwy 83
Monroe, GA 30655